View source for I4:FeatureTest-Selector Support for WS-Trust 1.3 and WS-SecurityPolicy 1.2

{{FeatureTest
  |name               = Selector Support for WS-Trust 1.3 and WS-SecurityPolicy 1.2
  |testtype           = Card Usage
  |identifier         = FTR-iis-protocol-1
  |areatested         = 
  |status             = active
  |summary            = Tests Identity Selector support for the OASIS standard versions of WS-Trust and WS-SecurityPolicy
  |testedrole         = Information Card Identity Selector
  |referencesolution1 = CardSpace .NET Framework 3.5
  |referencesolution2 =
  |success            = AppliesTo and ClientPseudoyum values both present in RST with values as below
  |failure            = AppliesTo or ClientPseudoym not present or values different
}}
# Open the result page for your solution and for this test.
# Import the "I3 Echo Trust 1.3" card from the file [[Image:I3_echo_sts_cards.crds]] using the password "i3_echo_sts_cards".
# Visit https://relyingparty.federatedidentity.net/CardSelectorRP/login.aspx and click the icon to submit a card.  Submit the card using the username "testclient" and password "testpassword".
## Verify that the AppliesTo value displayed contains <nowiki>[Address: https://relyingparty.federatedidentity.net/CardSelectorRP/login.aspx]</nowiki> and the certificate information for the four certificates in the chain and that the ClientPseudoynm value displayed is 6EfvL7OKTEbsvX86PMyxSfIGuoE+9HRJEKJTPYtzDd0=.
# If the selector supports no-SSL, also visit http://relyingparty.federatedidentity.net/CardSelectorRP/login.aspx and click the icon to submit a card.  Submit the card using the username "testclient" and password "testpassword".
## Verify that the AppliesTo value displayed is <nowiki>Address: http://relyingparty.federatedidentity.net/CardSelectorRP/login.aspx</nowiki> and that the ClientPseudoynm value displayed is WxRACYDlXWLICQAJjthFNGm2l5QYqX459lG4cMYDPMs=.
# Set outcome:
## If the success criteria was met, set the outcome to "Works".
## If the test failed, set the outcome to "Failed" and enter information about the failure in the Notes section.
## If other issues occurred set the result to "Issues" and describe them in the Notes section.
# Add either four tilde <nowiki>~~~~</nowiki> signs or a text name into the "Tested by" parameter.
# Update the Date Tested, Browser, and Operating System lines of the results page.