I5:FeatureTest-Selector PIN-Protection of Managed Card

From OSIS Open Source Identity Systems

list help  copy  as XML  edit

Feature Test	Selector PIN-Protection of Managed Card
Test Type	Card Management
Identifier	FTR-iis-cardmgmt-1a
Description	Tests that the selector enables the user to PIN-protect and unprotect a managed card
Role tested	Information Card Identity Selector
Known Successful Reference Solution(s)	I5:CardSpace .NET Framework 3.5
Success Criteria	Selector supports PIN-protection
Failure Criteria	Selector shows error or cannot either protect or unprotect cards

Features Proven

Feature	feature_type	solution_role
Ability to PIN protect a Managed Card	Information Card Identity Selector	usability

Instructions

Instructions

1. Open the result page for the solution for this test.
2. Open the Selector.
3. Set a PIN for a managed card.
4. Verify that the PIN is required before card can be used.
   1. (Note this may require exiting and restarting the Selector)
5. If the selector supports writing .crds files, export the card, import it into a different selector, and verify that the same PIN works there too.
   1. Or if the selector only supports reading .crds files, import a card that was PIN-protected by another selector and verify instead that the PIN set in the other selector works in the selector being tested.
6. Remove the PIN from the original card.
7. Verify that no PIN is required to use the card after the PIN has been removed.
8. Set outcome:
   1. If the success criteria was met, set the outcome to "Works".
   2. If the test failed, set the outcome to "Failed" and enter information about the failure in the Notes section.
   3. If other issues occurred set the result to "Issues" and describe them in the Notes section.
9. Add either four tilde ~~~~ signs or a text name into the "Tested by" parameter.
10. Update the Date Tested, Browser, and Operating System lines of the results page.